Home > Products > Submersible Sewage Pump > Details

60HP 45kw High Quality Electric Cast Iron Submersible Sewage Water Pump

WQ Series Sewage Water Pump 220V For Municipal Engineering , 0.37-7.5KW Introduction WQ submersible sewage pump is devel;

Send inquiry

Basic Info.

Model NO.	300WQ800-12-45
Position of Pump Shaft	Vertical Pump
Pump Casing Combined	Verticaljoint Surface Pump
Mounting Height	Since Irrigation Centrifugal Pumps
Impeller	Open
Usage	Pump, Pumps, Circulating Pump, Water Treatmen, Daily Life, Agriculture, Industry
Transport Package	Fumigation Wooden Crate
Trademark	Huayang
Origin	China
HS Code	8413709190

Product Description

WQ Series Sewage Water Pump 220V For Municipal Engineering , 0.37-7.5KW

Introduction

WQ submersible sewage pump is developed digestion and absorption of foreign advanced technology similar products on the basis of a successful, efficient, anti-winding, non-blocking, automatic coupling, high reliability and automatic control, etc., in the carriage of solid particles and long fiber refuse , has a unique feature.

WQ submersible sewage pump is small, compact, high efficiency, the water level can be automatically controlled according to user requirements, with automatic protection devices and control cabinets, dual-rail system is installed automatically.

Applications

WQ submersible sewage pump is mainly used for municipal engineering, industry, hospitals, buildings, hotels, restaurants and other industries. For sludge, waste, urban sewage discharge conveyor belt and a variety of solid long fibers (including corrosive, aggressive media applications).

Features

♦18.5KW more external circulating water pump automatic cooling, to ensure the safe operation of the electric pump at the lowest level status.

♦Tt the upper end of the pump and motor oil chamber equipped with water probe for monitoring the implementation of the water pump mechanical seal, once the leak, the control system will alarm protection.

♦Vice impeller for balancing mechanical seal external pressure, prevent water from entering the oil chamber, thus extending the life of the pump.

♦Impeller design unique, large passage through the long fibers and dirt, anti-clogging, anti-winding, high flow capacity.

♦Fitted between the impeller and volute lower end of the replaceable wear sleeve to keep the pump running at optimum efficiency.

Operation Mode

♦ the motor rated voltage 380V, frequency 50HZ three-phase AC power.

♦ the transmission medium temperature does not exceed 40oC.

♦ transmission fluid medium PH value 4-10.

♦ the solid phase material transport medium volume ratio of less than 2%.

♦ the transmission medium density of less than 1.2 × 103Kg / m3

fault phenomenon	failure cause	elimination methods
	1.No power supply or one or two phase power supply is needed	Check all phases of power supply and restore power supply
	2.Poor contact of ac contactor and burning of coil	Repair or replace contactors
can not start	3.The power switch is not closed, malfunction or damaged	Close the switch and replace it if the power indicator does not turn on
	4.Thermal relay trip or damage	Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
	Water level is too low	Put water in the sink
	The motor burned	Repair or replace the motor
	1.Line is loose	Check wiring and tighten connectors
	2.Frequency converter malfunction	Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal	3The frequency converter is damaged	Repair or replace
Automatic transmission failure	4.Pressure switch damage	Repair or replace
	5The pressure transmitter is damaged	Repair or replace
	6.Switch failure	Repair or replace
Pump non - suction pressure gauge pointer to beat violently	Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument	Check pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power	Too much flow, impeller wear	Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow

60HP 45kw High Quality Electric Cast Iron Submersible Sewage Water Pump

Previers

Back to list

Send inquiry

Send now